FAQ

With a cutting robot, boards can be cut of any material able to be placed inside the machine’s frame. These materials include, among other things:

• Gypsum
• Gypsum fireboard
• Fermacell fibreboard
• Gypsum floorboard
• Floor chipboard
• Plywood
• Powerboard H2O
• System ceilings
• Troldtekt
• Wind plaster
• Wet room gypsum
• Wet room boards

The cutting robot is available in four models.
KOBOTS 912 can handle boards of up to 900 x 1200 mm
KOBOTS 925 can handle boards of up to 900 x 2500 mm
KOBOTS 1225 can handle boards up to 1250 x 2500 mm
KOBOTS 1230 can handle boards up to 1250 x 3050 mm

Boards with a thickness of up to 25 mm can be cut with a cutting robot. It is not safe to place thicker boards in the machine, because the boards are too thick to be able to sit securely within the cutting robot’s frame.

It takes approx. 10 minutes to assemble or disassemble a cutting robot.
The cutting robot is a mobile cutting tool that can be simply and easily assembled and disassembled regardless of whether it is being used at a construction site, a workshop, or some other location.

This is the space needed for cutting robot variants KOBOTS 912, KOBOTS 925 and KOBOTS 1225.

A cutting robot is delivered in 5-6 boxes, depending upon whether an KOBOTS 912 or 925 has been ordered. The KOBOTS 912 can fit in by far most normal delivery vans, whereas the KOBOTS 925 requires a larger delivery van, for boxes of up to 305 cm.

The cutting robot is controlled via the accompanying smartphone. The user can either enter the desired dimensions by manual entry via the KOBOTS app or by speaking the dimensions through its voice control.

No, it is only possible to download the KOBOTS app for Android.
When renting or purchasing a cutting robot, there is an accompanying Android smartphone, so you do not need to use your own telephone or buy one especially for the purpose.

When renting or purchasing a cutting robot, KOBOTS will ensure that the requisite training is provided for the machine, so you get off to a good and safe start. We ensure that you are properly fitted out, so you can handle difficult cuts, solve unexpected technical challenges and are able to train a colleague, etc.

When purchasing a minimum of one cutting robot, a 2-day training course is included, ensuring that you are well-prepared for a number of various situations. Location of training will be agreed upon individually.

You will always receive a direct contact person, who you can always contact if you are in doubt about how to make a specific cut or if the machine suddenly does something unexpected.

The cutting robot is relatively maintenance-free. It must be cleansed periodically of dust in order to make sure that everything mechanical is kept clean. The cutting robot must only be cleaned using a vacuum cleaner.

All strips and guides must be regularly vacuumed free of dust. In addition, the blade must be vacuumed regularly in order to ensure that the dust from the boards does not jam up the angle grinder.