What materials can be cut with an AMIGO?
With an AMIGO, boards can be cut of any material able to be placed inside the machine’s frame. These materials include, among other things:
- Gypsum fireboard
- Fermacell fibreboard
- Gypsum floorboard
- Floor chipboard
- Powerboard H2O
- System ceilings
- Wind plaster
- Wet room gypsum
- Wet room boards
What board sizes can I cut with an AMIGO?
The AMIGO is available in two models, the AMIGO 912 and the AMIGO 925.
The AMIGO 925 can handle boards of up to 90 x 250 cm
The AMIGO 912 can handle boards of up to 90 x 120 cm
What is the maximum board thickness that an AMIGO can cut?
Boards with a thickness of up to 25 mm can be cut with an AMIGO. It is not safe to place thicker boards in the machine, because the boards are too thick to be able to sit securely within the AMIGO’s frame.
How much time does it take to assemble or disassemble an AMIGO?
It takes approx. 10 minutes to assemble or disassemble an AMIGO.
The AMIGO is a mobile cutting tool that can be simply and easily assembled and disassembled regardless of whether it is being used at a construction site, a workshop, or some other location.
How much space is needed to be able to set up an AMIGO?
The AMIGO is available in two variants – the AMIGO 912 and the AMIGO 925.
75 x 165 cm
75 x 295 cm
How much space does an AMIGO take up when it is fully packed up?
An AMIGO is delivered in 5-6 boxes, depending upon whether an AMIGO 912 or 925 has been ordered. The AMIGO 912 can fit in by far most normal delivery vans, whereas the AMIGO 925 requires a larger delivery van, for boxes of up to 305 cm.
How is the AMIGO controlled?
The AMIGO is controlled via the accompanying smartphone. The user can either enter the desired dimensions by manual entry via the KOBOTS app or by speaking the dimensions through its voice control.
Is the KOBOTS app available for both iOS and Android?
No, it is only possible to download the KOBOTS app for Android.
When renting or purchasing an AMIGO, there is an accompanying Android smartphone, so you do not need to use your own telephone or buy one especially for the purpose.
Service & support
How quickly can I get assistance if there are technical problems with an AMIGO?
If you are experiencing technical problems with your AMIGO or have a need for support, it is always possible to contact Support & Service Hotline at (+45) 3147 0301. KOBOTS Support is able to connect online to your AMIGO, allowing them to attempt to remedy the problem immediately. If the problem cannot be resolved by online support, we will send a technician out to you within 24 hours. Most often, you will receive assistance within a couple of hours.
Furthermore, we will ensure that your AMIGO is always updated, since our technicians can send updates online directly to your machine.
How do I get started with using an AMIGO?
When renting or purchasing an AMIGO, KOBOTS will ensure that the requisite training is provided for the machine, so you get off to a good and safe start. We ensure that you are properly fitted out, so you can handle difficult cuts, solve unexpected technical challenges and are able to train a colleague, etc.
When purchasing a minimum of one AMIGO, a 2-day training course is included, ensuring that you are well-prepared for a number of various situations. Location of training will be agreed upon individually.
You will always receive a direct contact person, who you can always contact if you are in doubt about how to make a specific cut or if the machine suddenly does something unexpected.
How should I maintain our AMIGO?
The AMIGO is relatively maintenance-free. It must be cleansed periodically of dust in order to make sure that everything mechanical is kept clean. The AMIGO must only be cleaned using a vacuum cleaner.
All strips and guides must be regularly vacuumed free of dust. In addition, the blade must be vacuumed regularly in order to ensure that the dust from the boards does not jam up the angle grinder.
Can I make bevel cuts with an AMIGO?
No, it is not possible at the present point in time to cut bevels with an AMIGO.
Our products are constantly under development. We listen to the needs and desires of our customers, and strive to accommodate the desires of our customers.
Can the AMIGO make round holes?
No, it is not possible to make round holes with the AMIGO. Fundamentally, the AMIGO can cut the same thing, as you can cut with a plunge saw. You can cut rectangular holes with the machine.
What type of blade is mounted on the AMIGO?
An eternity cutting blade with a 125 mm diameter is mounted on the AMIGO.
How often should I change the blade on an AMIGO?
You can make approx. 5,000 cuts with the blade that is delivered with the AMIGO.
What requirements are posed of my vacuum cleaner for cutting with an AMIGO?
We recommend that you use an H-class vacuum cleaner, preferably with a dust chamber, in order to produce the least possible dust when cutting with an AMIGO. We also recommend that you choose a vacuum cleaner with a suction power of 3,000 l/min.
A vacuum cleaner is not included with the purchase of an AMIGO.
How quickly can KOBOTS deliver an AMIGO to us?
Most often, we are able to deliver an AMIGO with a delivery time of a few days in Denmark.
During periods when the demand is greatest, we can experience that delivering an AMIGO may take a couple of weeks. We recommend that you contact us as quickly as possible once you know when you will be using an AMIGO on your project, so we can then reserve a machine for the desired point in time – thus enabling you to benefit from an AMIGO right from the start of the project.
Where can I purchase an AMIGO?
AMIGO cutting robots can be purchased directly from KOBOTS.
You can book a demo, order or purchase an AMIGO by contacting us directly at (+45) 7020 3212.
How can I rent an AMIGO?
You can rent an AMIGO by contacting KOBOTS at (+45) 7020 3212 or sending us an E-mail at email@example.com.
An AMIGO can be rented on a weekly and monthly basis.
Is there a minimum rent period when renting an AMIGO?
An AMIGO can be rent for a week or more.
The prices for renting an AMIGO depend on the duration of the rent. For an offer for a rent period, contact us at (+45) 7020 3212
How large should a project be in order for it to justify investing in an AMIGO?
It completely depends on your workflow and what the project is and types of tasks involved.
With an AMIGO and the right workflow, it is possible to feed up to 6 workers (for our best customer case) with cut boards.
It also depends very much on how often the AMIGO can be used in the project.
The most expensive rent price is approx. DKK 600 per day for an AMIGO.
One more question?
If you still cannot find what you’re looking for, don’t hesitate reaching out to us.
Subscribe to our newsletter and get inspiration and great news directly in your inbox 8-10 times annually.
Get in touch with us:
© Kobots 2021